• Plot 81, Road No 7, Kathwada GIDC, Ahmedabad 382430, India

BITUMEN PRESSURE DISTRIBUTOR

MODELKCE-3000KCE-4000KCE-6000KCE-10000
CAPACITY3000 LTRS.4000 LTRS.6000 LTRS.10,000 LTRS.

KAUSHIK Bitumen Sprayer Machine / Bitumen Pressure Distributor is provided in the form of a truck mounted, self-propelled along with the appropriate heating system and variable spray bar. It is designed to operate on a consistent pressure system, complete with air-compressor, bitumen pump, auxiliary engine, tank mounting and other accessories. It offers constant rate applications of hot bitumen or cold tar.

Bitumen Sprayer comes equipped with a unique Pressure Cleaning System (PCS) which helps clean the system once it is used. Cleaning it after use ensures that it doesn’t get clogged. You can also use it with bitumen emulsion. Trolley mounted versions are provided on demand if you need it instead of a truck mounted one.

Bitumen Sprayer Machine, manufactured by Kaushik ConInfra, meet the latest technology standards and site requirements. Fit for realistic work routine, our Asphalt Sprayer ensures accurate binder dosage for best quality surface treatment.

Our Bitumen Sprayer stands out due to perfect dosage which delivers consistent and accurate results. Completely equipped with measuring instruments and sophisticated control technology, our Bitumen Sprayers deliver high efficiency along with cost-effectiveness.

The technology we use to make Bitumen Sprayer ensures high efficiency and application on large areas with superior quality.

Utilizing sensor-controller dosing, the needed quantities of binding agents are fulfilled without any confinement on the total working width. With computer control, all the necessary technical data, including spray pressure and air and soil temperature, humidity, etc. can be saved using GPS coordinates for further analysis. Our creative low-pressure spraying technology which brings down the spray mist ensures environmentally conscious use of the equipment. Using our Asphalt Sprayer, impregnations, pre-spray work or special construction methods can also be accomplished. Our consciously designed handling and control, makes the machine very easy to use and ensures safety at work. By selecting different equipment options, you can use the Bitumen sprayer truck to meet your unique requirement.

  • Fully – Insulated Tank with High Efficiency Heating System
  • Air Cooled Diesel Engine & Positive Displacement Gear Pump
  • Designed to Stuff Standard Truck Chassis
  • Safe & Easy in Operation
  • Hand Spray System
  • Unique Pressure Cleaning System
  • Totally Factory Tested, Arrives Ready to Launch
  • 0 – 6 Kg/cm2, Pressurized Bitumen Spraying
  • Standard Width: 2.4 M.
  • Adjustable Extension Bar For Spraying Width up to 4.2 M.
  • Nozzle Distance: 225mm Nozzle c/c.
  • Pneumatically Operated Nozzles For Spray Bar Controlling.
  • With Hand Torch Burner
  • Unique Pressure Cleaning System
  • Tank is fabricated by a 5 mm MS Sheet and is coated by 50 mm glass wool to prevent heat loss. The outer covering is galvanized as it has long life due to its anti-corrosion properties.
  • Manhole for maintenance or to fill the bitumen tank is of 450 mm diameter.
  • Manual and electronic temperature gauge is provided for temperature display up to 300 Degree Celsius.
  • Electronic temperature gauge is given at the drivers cabin.
  • A ladder and platform is provided for ease of access to the top. A cock is given so that full Bitumen Tank can be drained out when required.
  • Single high pressure oil burner (Diesel Compatible) for adequate heating of viscose binder is provided. Burner does the task of heating bitumen tank. Tank Burner of capacity 43000 or 100000 cal is provided, depending on the sprayer capacity. A hand torch type burner of capacity 26000 cal is for manually cleaning the pipelines. This burner will be useful to facilitate quick start up of the sprayer in extreme cold.
  • There are two fuel storage tanks provided with the sprayer. One is of 100 Litres for burner and fro engine, fuel storage is of 50 Litres.

Powered By A 25HP Air Cooled Diesel Engine

  • A cleaning system is provided with the sprayer near the bitumen pump.
  • At the end of day bitumen flow has to be off and entire spray line and spray bar can be cleaned by using air pressure and diesel.
  • A pneumatic hand lever valve is provided near the operator’s seat.
  • This is important to open and close the spray nozzles.

Commonly Asked Questions About Our Bitumen Pressure Distributor!

 

What is Unique About Our Bitumen Pressure Distributor?

Our bitumen pressure distributor is customizable and comes equipped with the best-in-class technology. The fully insulated tank with a high-efficiency heating system delivers consistent results. Furthermore, sophisticated control technology and a unique pressure cleaning system save time and valuable resources.

Can Your Bitumen Pressure Distributor Handle Large Projects?

Yes. Our bitumen pressure distributor comes with varied capacities to handle large-scale projects. You can also add customized accessories to suit your business needs.

How Does the Computer Control Help?

At Kaushik ConInfra, we have designed an advanced bitumen pressure distributor with computer control. This feature will help you save valuable data such as GPS coordinates, spray pressure, soil temperature, and more for future analysis. It will help you cut down costs and enable greater operational efficiency.

Does the Equipment Allow Consistent Rate Application?

Yes, our bitumen sprayer allows consistent rate application of hot bitumen for your construction project. With accurate measurement instruments and sophisticated control technology, you can expect quality results. Our sprayers also have an adjustable extension bar with pneumatically operated nozzles to meet your unique requirements.